Our fibreglass planters are manufactured in high-quality reinforced fibreglass, with additional reinforcement in the corners. The standard colour used is black/grey RAL 7021. Also available

in RAL colours: 7006 | 7016 | 7035 | 9005 | 9010 (surcharge 10%). The quality of all our fibreglass planters is enhanced by the colouring, which runs through the entire material. The upper

edge has been reversed twice, which gives this planter a splendid timeless appearance. We recommend that the planter should be cleaned at least twice a year. Please note that some

cleaners may damage or affect the material, The best product for cleaning and maintaining fibreglass is the care-set that we offer on the accessories page.

Do not clean with steel wool, sand paper, solvents or any other abrasive materials, cleaning with a pressure washer can also cause damage.

5 years warranty






These planters are made of 3mm thick aluminum as standard, although they can also be produced in 4-5mm. Aluminum is light, strong, durable and resistant to corrosion. The top edge of all

planters is reversed twice, which gives them a strong and timeless appearance. All Aluminum planters are equipped with 15mm high feet, so the planter is raised slightly off the ground. Once

constructed the planters are powder coated with a strong adhesive primer and finished with a coloured coating.

Standard colours are RAL 7021 | 7035 | 9010. Almost all other RAL colours are possible (beware of start-up costs)

5 year warranty





Liessentstraat 4,  5405 AG Uden


+31(0)413 351272


showroom Uden:

Mon   8.00 - 17.00

Tue    8.00 - 17.00

Wed   8.00 - 17.00

Thu    8.00 - 17.00

Fri      8.00 - 16.00

Sat    closed

Sun   closed

One To Sit op homify